|
|
|
|
|
|
|
|
|
DataPure Phoenix-3 The Phoenix-3 will safely, efficiently and precisely clean, scan and re-tension your 3590 cartridges, assuring optimum performance. The Phoenix-3 cleans your tape on both sides; a vacuum-assisted blade cleans the oxide surface, while two automatic vacuum assisted tissue stations clean both the oxide and the back surfaces. The Phoenix-3 with it's optical scanner detects physical defects as small as .025 inches. It is self-calibrating, and automatically recalibrates sensor bias level for each cartridge, and it includes a standard printer output. Tape
Acceptance Tape Handling Compatible air bearing tape path minimizes contact and friction Tension transducer provides signal for microprocessor control of tape tension |
| Tape
Cleaning and Retensioning Vacuum-assisted cleaning blade and 2 fabric wipes provide maximum removal of debris 16 Character display for operator messages Automatic operator alert for fabric and blade replacement Measures tape length and identifies short tapes Retensions tape to approved specification Sequentially loads, cleans and unloads up to 10 cartridges Automatic error recovery from most conditions. Maintains unit error log memory for improved maintenance. Safety Considerations Designed to UL, OSHA, CSA, and VDE standards Tape Speed and Tension Cleaning speed: 2m/sec. 78.8 ips +/- 4% Cleaning/retensioning cycle less than 5 minutes per tape Tension:
< 6 oz. |
Static Eliminator Ionizer element Power Requirements 110/220 VAC, 60/50 Hz 200 Watts maximum Drive System Microprocessor controlled Pulsed=width modulation (PWM) brushless DC reel motors Bi-directional dynamic braking Dimensions Phoenix-3
with Autoload: 9" high 20" wide 29" deep |
